China NEMA 23 Torque Increased High Precision Planetary Gearbox Stepping Motor motor engine

Solution Description

 

Solution Description

Large Precision Planetary Equipment Stepper Motor

The high precision planetary equipment stepper motor is substantial precision and reduced noise with precision metal teeth,can endure greater axial pressure and radial power. Larger concentricity, a lot more steady transmission. These motors are available in common:
Nema seventeen(42*34, forty two*40)
Reduction ratio:1:5 , 1:7 , 1:10 , 1:16 ,1:20 ,1:25 , 1:35 ,1:forty, 1:fifty,1:701:one hundred. 
Nema 23(fifty seven*55)
Reduction ratio:1:5 , 1:7 , 1:10 , 1:16 ,1:20 ,1:25 , 1:35 ,1:40
Nema 24(sixty*fifty five)
Reduction ratio:1:5 , 1:7 , 1:10 , 1:16 ,1:20 ,1:25 , 1:35 ,1:forty
And 48 hours delivery, in stock .

Application:
Automation control, medical equipment, textile machinery, and packaging machinery fields. Not only in the field of the automation industry, it also has a good use status in the home.   Products with low speed and inertia are often seen: electric  curtains, electric shutters, etc
 

Merchandise Parameters

Planetary Gear Box Specification:

Common Specification:
Housing Content Metal
Bearing at Output Ball Bearings
Max.Radial Load(10mm from flange) 450N
Max.Shaft Axial Load 300N
Backlash at No-load 1 stage≤15′,2 stage≤20′

57HS Hybrid Stepping Motor Requirements:
Model No. Motor Duration(L1) Rated Existing Resistance Inductance Holding Torque # of Leads Rotor Inertia Mass Max.Equipment Ratio
Voltage /Phase /Period /Phase
Single Shaft (L)mm V A Ω mH mN.m No. g.cm2 Kg  
57HS5417 fifty five 1.7 two. .85 two.five 950 four 200 .sixty four ≤1:70

 

57HS5417 Planetary Gearbox Requirements:
Reduction ratio 4 five 7 10 sixteen twenty 25 28 35 40 50 70
Whole Height(L1+L2) (mm) 112 112 112 112 128 128 128 128 128 128 128 128
Output torque ( mN.m) 3648 4560 6384 9120 14288 17860 22325 25004 30000 25000 25000 20000
Overall Weight(g) 1360 1360 1360 1360 1590 1590 1590 1590 1590 1590 1590 1590
Amount of gear trains 1 2
Reducer Size(L2)   (mm) 57 73
Performance 96% 94%

Comprehensive Images

 

Business Profile

ZheJiang UMot Engineering Co., Ltd. specializes in R&D and income of stepper motors, servo motors, linear modules and relevant motion control products, customizing and developing higher-good quality motor goods for users with special demands close to the globe, and providing all round answers for movement control programs. Products are exported to much more than thirty countries and areas which includes the United States, Germany, France, Italy, Russia, and Switzerland. The company’s principal goods and program design and style have been commonly utilized in automation manage, precision instruments, health-related products, wise property, 3D printing and a lot of other fields.
Our firm has been regarded as a large-tech organization by related departments, has a full top quality administration program, has attained ISO9001, CE, RoHs and other related certifications, and holds a quantity of electrical patent certificates. “Focus, Professionalism, Focus” in the area of automation of motor R&D and technique control answers is the company’s enterprise purpose. “Be your most reliable partner” is the company’s service philosophy. We have always been aiming to “make 1st-class items with expert technological innovation”, preserve speed with the times, innovate constantly, and provide far more customers with much better merchandise and services.

FAQ

1. Shipping technique:
1)Worldwide Categorical delivery DHL&FEDEX &UPS&TNT& 7-10days
two)Shipping and delivery by air 7-10 times
three)delivery by sea, supply time is dependent on the spot port.

two. Technical Assist:
We can offer you with specialist technical assist. And our items high quality assure is 6 months. Also, we accept goods custom-made.

three. Why should you buy from us, not from other suppliers?
Expert one particular-to-1 motor tailored. The world’s big organization of decision for high-quality suppliers. ISO9001:2008 high quality administration method certification, through the CE, ROHS certification.

4. How to pick types?
Just before buying, you should get in touch with us to confirm model No. and technical specs to avoid any misunderstanding.

5. Are you a manufacturing facility?
Of course, we are a manufacturing facility, and we produce stepper motor/driver, Servo motor/driver.

 

To Be Negotiated 5 Pieces
(Min. Order)

###

Application: Automation Control, Medical Equipment, Textile Mac
Speed: Low Speed
Number of Stator: Two-Phase
Excitation Mode: HB-Hybrid
Function: Control, Driving
Number of Poles: 2

###

Samples:
US$ 55.0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

General Specification:
Housing Material Metal
Bearing at Output Ball Bearings
Max.Radial Load(10mm from flange) 450N
Max.Shaft Axial Load 300N
Backlash at No-load 1 stage15′,2 stage20′

###

57HS Hybrid Stepping Motor Specifications:
Model No. Motor Length(L1) Rated Current Resistance Inductance Holding Torque # of Leads Rotor Inertia Mass Max.Gear Ratio
Voltage /Phase /Phase /Phase
Single Shaft (L)mm V A Ω mH mN.m No. g.cm2 Kg  
57HS5417 55 1.7 2.0 0.85 2.5 950 4 200 0.64 1:70

###

57HS5417 Planetary Gearbox Specifications:
Reduction ratio 4 5 7 10 16 20 25 28 35 40 50 70
Total Height(L1+L2) (mm) 112 112 112 112 128 128 128 128 128 128 128 128
Output torque ( mN.m) 3648 4560 6384 9120 14288 17860 22325 25004 30000 25000 25000 20000
Total Weight(g) 1360 1360 1360 1360 1590 1590 1590 1590 1590 1590 1590 1590
Number of gear trains 1 2
Reducer Length(L2)   (mm) 57 73
Efficiency 96% 94%
To Be Negotiated 5 Pieces
(Min. Order)

###

Application: Automation Control, Medical Equipment, Textile Mac
Speed: Low Speed
Number of Stator: Two-Phase
Excitation Mode: HB-Hybrid
Function: Control, Driving
Number of Poles: 2

###

Samples:
US$ 55.0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

General Specification:
Housing Material Metal
Bearing at Output Ball Bearings
Max.Radial Load(10mm from flange) 450N
Max.Shaft Axial Load 300N
Backlash at No-load 1 stage15′,2 stage20′

###

57HS Hybrid Stepping Motor Specifications:
Model No. Motor Length(L1) Rated Current Resistance Inductance Holding Torque # of Leads Rotor Inertia Mass Max.Gear Ratio
Voltage /Phase /Phase /Phase
Single Shaft (L)mm V A Ω mH mN.m No. g.cm2 Kg  
57HS5417 55 1.7 2.0 0.85 2.5 950 4 200 0.64 1:70

###

57HS5417 Planetary Gearbox Specifications:
Reduction ratio 4 5 7 10 16 20 25 28 35 40 50 70
Total Height(L1+L2) (mm) 112 112 112 112 128 128 128 128 128 128 128 128
Output torque ( mN.m) 3648 4560 6384 9120 14288 17860 22325 25004 30000 25000 25000 20000
Total Weight(g) 1360 1360 1360 1360 1590 1590 1590 1590 1590 1590 1590 1590
Number of gear trains 1 2
Reducer Length(L2)   (mm) 57 73
Efficiency 96% 94%

How to Select a Gear Motor

A gearmotor is an electrical machine that transfers energy from one place to another. There are many types of gearmotors. This article will discuss the types of gearmotors, including Angular geared motors, Planetary gearboxes, Hydraulic gear motors, and Croise motors. In addition to its uses, gearmotors have many different characteristics. In addition, each type has distinct advantages and disadvantages. Listed below are a few tips on selecting a gearmotor.

Angular geared motors

Angular geared motors are the optimum drive element for applications where torques, forces, and motions need to be transferred at an angle. Compared to other types of geared motors, these have few moving parts, a compact design, and a long life. Angular geared motors are also highly efficient in travel drive applications. In addition to their durability, they have a low maintenance requirement and are highly corrosion-resistant.
Helical worm geared motors are a low-cost solution for drives that employ angular geared motors. They combine a worm gear stage and helical input stage to offer higher efficiency than pure worm geared motors. This drive solution is highly reliable and noise-free. Angular geared motors are often used in applications where noise is an issue, and helical worm geared motors are particularly quiet.
The gear ratio of an angular geared motor depends on the ratio between its input and output shaft. A high-quality helical geared motor has a relatively low mechanical noise level, and can be installed in almost any space. The torque of a helical geared motor can be measured by using frequency measurement equipment. The energy efficiency of angular geared motors is one of the most important factors when choosing a motor. Its symmetrical arrangement also allows it to operate in low-speed environments.
When selecting the right angular geared motor, it is important to keep in mind that increased torque will lead to poor output performance. Once a gear motor reaches its stall torque, it will no longer function properly. This makes it important to consult a performance curve to choose the appropriate motor. Most DC motor manufacturers are more than happy to provide these to customers upon request. Angular geared motors are more expensive than conventional worm gear motors.
Motor

Planetary gearboxes

Planetary gearboxes are used in industrial machinery to generate higher torque and power density. There are three main types of planetary gearboxes: double stage, triple stage, and multistage. The central sun gear transfers torque to a group of planetary gears, while the outer ring and spindle provide drive to the motor. The design of planetary gearboxes delivers up to 97% of the power input.
The compact size of planetary gears results in excellent heat dissipation. In some applications, lubrication is necessary to improve durability. Nevertheless, if you are looking for high speed transmission, you should consider the additional features, such as low noise, corrosion resistance, and construction. Some constructors are better than others. Some are quick to respond, while others are unable to ship their products in a timely fashion.
The main benefit of a planetary gearbox is its compact design. Its lightweight design makes it easy to install, and the efficiency of planetary gearboxes is up to 0.98%. Another benefit of planetary gearboxes is their high torque capacity. These gearboxes are also able to work in applications with limited space. Most modern automatic transmissions in the automotive industry use planetary gears.
In addition to being low in cost, planetary gearboxes are a great choice for many applications. Neugart offers both compact and right angle versions. The right angle design offers a high power-to-weight ratio, making it ideal for applications where torque is needed to be transmitted in reverse mode. So if you’re looking for an efficient way to move heavy machinery around, planetary gearboxes can be a great choice.
Another advantage of planetary gearboxes is their ability to be easily and rapidly changed from one application to another. Since planetary gears are designed to be flexible, you don’t have to buy new ones if you need to change gear ratios. You can also use planetary gears in different industries and save on safety stock by sharing common parts. These gears are able to withstand high shock loads and demanding conditions.
Motor

Hydraulic gear motors

Hydraulic gear motors are driven by oil that is pumped into a gear box and causes the gears to rotate. This method of energy production is quiet and inexpensive. The main drawbacks of hydraulic gear motors are that they are noisy and inefficient at low speeds. The other two types of hydraulic motors are piston and vane-type hydraulic motors. The following are some common benefits of hydraulic gear motors.
A hydraulic gear motor is composed of two gears – a driven gear and an idler. The driven gear is attached to the output shaft via a key. High-pressure oil flows into the housing between the gear tips and the motor housing, and the oil then exits through an outlet port. Unlike a conventional gear motor, the gears mesh to prevent the oil from flowing backward. As a result, they are an excellent choice for agricultural and industrial applications.
The most common hydraulic gear motors feature a gerotor and a drive gear. These gears mesh with a larger gear to produce rotation. There are also three basic variations of gear motors: roller-gerotor, gerotor, and differential. The latter produces higher torque and less friction than the previous two. These differences make it difficult to choose which type is the best for your needs. A high-performance gear motor will last longer than an ordinary one.
Radial piston hydraulic motors operate in the opposite direction to the reciprocating shaft of an electric gearmotor. They have nine pistons arranged around a common center line. Fluid pressure causes the pistons to reciprocate, and when they are stationary, the pistons push the fluid out and move back in. Because of the high pressure created by the fluid, they can rotate at speeds up to 25,000RPM. In addition, hydraulic gear motors are highly efficient, allowing them to be used in a wide range of industrial and commercial applications.
Hydraulic gear motors complement hydraulic pumps and motors. They are also available in reversible models. To choose the right hydraulic motor for your project, take time to gather all the necessary information about the installation process. Some types require specialized expertise or complicated installation. Also, there are some differences between closed and open-loop hydraulic motors. Make sure to discuss the options with a professional before you make a decision.
Motor

Croise motors

There are many advantages to choosing a Croise gear motor. It is highly compact, with less weight and space than standard motors. Its right-angle shaft and worm gear provide smooth, quiet operation. A silent-type brake ensures no metallic sound during operation. It also offers excellent positioning accuracy and shock resistance. This is why this motor is ideal for high-frequency applications. Let’s take a closer look.
A properly matched gearmotor will provide maximum torque output in a specified period. Its maximum developing torque is typically the rated output torque. A one-twelfth-horsepower (1/8 horsepower) motor can meet torque requirements of six inch-pounds, without exceeding its breakdown rating. This lower-cost unit allows for production variations and allows the customer to use a less powerful motor. Croise gear motors are available in a variety of styles.

China NEMA 23 Torque Increased High Precision Planetary Gearbox Stepping Motor     motor engine	China NEMA 23 Torque Increased High Precision Planetary Gearbox Stepping Motor     motor engine
editor by czh 2023-01-14